Hi Chris. Both products have excellent resistance to oils and other petroleum products. I can’t really say which is better since neither failed our tests. However, BallistiX has better chemical resistance against strong solvents. If oil is your main concern, TS210 is the better value and easier to apply.

Hi Leslie. Any of the water-based stains/dyes would be compatible. DeltaDye is one such example. We have an article on it here. Another is ColorWave by Direct Colors. Acid stains will work. However, it’s important to properly neutralize the concrete before rinsing away the acid remnants. Also, etching caused by the acid stains will make the concrete more porous and would most likely require a minimum of two coats of the Ballistiseal Pro before application of the BallistiX sealer.

Hi Glenn. Yes, BallistiX is a great option for pool decks. For a rougher acrylic surface, it would actually be sprayed on with the non-slip media mixed in. Typically, the surface needs to be thoroughly cleaned and then wiped with the 99% ISO. We highly recommend that you give ArmorPoxy a call to discuss your project. Tell them we sent you. They can recommend the best BallistiX formulation to use as well as provide the application information you need.

I am a concrete contractor. We are trying to help a customer who has a new pool pad installed about a year ago. It is beautifully stamped and colored and has an acrylic sealer. But, the contractor who installed used a dark color and combo with the acrylic sealer…it gets both very slick and hot. The stamp, is a ‘stone look’ and has some deep grooves. I am wondering if BalistiX Squire with a non-slip pack would be a potential solution. If so, any suggestions on preparing the surface and installing product, since it is not a smooth surface.