Hey Jerry – I recently ordered roll-on-rock kit and got the same flake as Neil. It’s listed on Versatile’s site as the ‘brindle flake’ in color schist. If your install requires multiple boxes you can get both sizes to get the same look- schist is offered in 1/4″ and 1″.

I haven’t installed yet but I got equal parts 1″ and 1/4″. Versatile recommends laying out the 1″ then the 1/4″. Not sure what products Neil went with but that flake combo works with the 2-coat/3-layer system of 4195, flake, 4085.

Hi D. No, SikaFlex is a very flexible joint sealer that is not to be coated over. Coatings will not adhere properly either. There are no issues with applying a coating to a suspended slab as long as you honor the joints and do not coat over them.

Thanks

Hi Neil, I saw your floor in the car forum and looks amazing
* Did you use equal 1/4″ & 1″ flake ?
* What color flake combo?
* Was it just 1 base coat & 1 top coat?

Ahh… OK, that makes more sense. It looks like your question was posted in the comments box and not directly to Neil. You need to click on the reply button in his initial comment. If his email is still good, then he may respond. Either that or you could try contacting him via the Civic forum. I looked over his forum post and he doesn’t say exactly what material was used. I can say though that he definitely used 1″ flake on a lot of the floor.

Hi Shea – I think i replied to Neil’s post? Maybe not
Neil Kleinschmit says:
“I emailed with Versatile since my garage size didn’t fit their kits. They sent a list of amounts of coating I’d need as well as amounts of flake I’d need to do full coverage with 1 inch and 1/4 flakes.”

Here is the link: https://www.civicx.com/forum/threads/86salmon-lunar-silver-si.41987/post-1005193

Floor looks like a granite

Thanks again