One primary objective for many homeowners is to seal the concrete of their garage floor in order to protect it from water intrusion, dusting, road salts, pitting, and most importantly, to help resist stains. If you are looking for the best value and without concern about having the latest decorative finish or coating for your garage floor, then a siliconate penetrating concrete sealer may be all that you need.
Why? Although decorative garage floor coatings such as epoxy look great and do a good job of sealing the concrete, there are people who have simple “working” garages. They are not as concerned about how nice a concrete sealer looks, but rather how well it performs without a lot of expense and preparation. If you think this may be you, then here is why you need to consider a siliconate concrete sealer.
What makes a siliconate sealer different than a coating is the fact that it actually penetrates (hence the name) into the concrete to create a protective barrier at the subsurface. They are also very easy to apply. Typically, the only bare concrete preparation required is to properly clean it first.
Other garage floor sealers such as acrylic, epoxy, and polyurethanes are topical in nature. They sit on top of the surface to form a protective film or coating.
With some exceptions, most topical sealers require additional concrete preparation other than cleaning in order for them to adhere properly. This can include sanding, etching, or even grinding the concrete surface.
Once applied, a siliconate sealer works by permeating into the pores of the concrete and chemically reacting with carbon dioxide. This reaction creates a cross-linking molecular membrane barrier that is almost gel-like and hydrophobic in nature.
This hydrophobic barrier is effective at repelling water and other liquids such as chemicals, and salty brines. In essence, water, automotive fluids, and most other liquids will tend to bead or sheet on the concrete instead.
How a siliconate penetrating sealer works on a concrete garage floor
Furthermore, the chemical reaction that fills the pores and capillaries within the upper surface of the slab has the additional benefit of slightly strengthening the surface of the concrete as well. While not as effective as a densifier for surface strength, it does help with surface wear nonetheless.
Concrete Siliconate Sealer Benefits
- Forms a hydrophobic barrier to help prevent intrusion of water and other liquids
- Reduces dirt buildup and deep staining
- Works to prevent pitting, spalling, and surface cracks from water absorption
- Reduces and may even prevent efflorescence
- Helps to prevent the harmful effects of road salts and deicing fluids
- Inhibits mold and mildew growth
- Breathable, water-based, and low in VOCs
- Excellent for garage floors, driveways, walkways, patios, and basement floors
- Low cost delivers one of the best values in concrete sealers
As stated, additional benefits to consider include mold and mildew resistance as well as protection from the harmful effects of road salts and deicing fluids. This means that if your garage temperatures drop below freezing overnight, the surface will be protected from the pitting and spalling that can occur due to the expanding effects of freeze-thaw cycles from melted snow and deicing fluids that can seep into the concrete.
Siliconate sealers dry to a natural-looking finish without any sheen. And because a penetrating sealer is non-film forming, it allows for the same anti-slip protection as bare concrete.
Furthermore, you don’t have to worry about damaging the sealer if you drag sharp objects across the garage floor when working on cars or projects. They are also a favorite concrete sealer for driveways, walkways, and patios.
Other factors to consider are expense and ease of application. This is what makes a siliconate concrete sealer for your garage floor one of the best values you can find.
Most 2-car garages will require only one or two gallons of sealer depending on the manufacturer. Cost is usually less than $50 a gallon for a quality product and application is much easier than applying a coating or even paint for that matter. Expect it to last up to 10 years or more before a new application is necessary.
One thing to be aware of is that concrete penetrating sealers do not seal cracks. Cracks will still need to be repaired first in order to seal the garage floor properly.
This post may contain affiliate links. If you use these links to make a purchase, we may earn a small commission. As an Amazon Associate, All Garage Floors earns from qualifying purchases. You can read our full disclaimer here.
Best Siliconate sealers that we recommend
There are two products we like to recommend that work extremely well and get great reviews.
The first is PS101 by Concrete Sealers USA. This siliconate sealer has a strong reputation for great performance and is known for lasting years. In fact, the reviews are outstanding.
It only wears down as the concrete wears down and can also be used as a “cure and seal” for new concrete.
Application is easy with no special mixing required. Expect a coverage rate of 300 – 450 ft² per gallon for machine troweled and smooth finishes.
Purchase PS101 Concrete Sealer – 1 Gallon
Purchase PS101 Concrete Sealer – 5 Gallons
If you like shopping from Amazon, you can find PS101 there as well.
Purchase PS101 – 1 Gallon From Amazon
Purchase PS101 – 5 Gallon From Amazon
Important to note; if you plan on using a siliconate sealer for a broom finish surface, Concrete Sealers USA recommends their PS102 Concrete Sealer.
PS102 also works extremely well for driveways, walkways, and patios. The reason for this is that these types of finishes are typically more porous than a steel troweled or machine troweled garage floor. PS102 is formulated for the more porous surface that these finishes provide.
Purchase PS102 Concrete Sealer
Expect a coverage rate of 200-300ft² per gallon of PS102 when applied to these types of surfaces. Just like the PS101, it can also be used as a “cure and seal” for newly poured concrete.
The second product we can recommend is Armor SC25 by Foundation Armor. Besides garage floors, this penetrating siliconate sealer is developing a strong reputation for use on driveways, walkways, patios, and basements.
The coverage rate is 200 – 250 ft² for machine troweled or smooth dense surfaces. Expect 100 – 150 ft² for a broom finish or rough surface.
Just as the PS101, SC25 is water-based and no special mixing is required. One note to make is that Foundation Armor does not recommend SC25 as a “cure and seal” for freshly poured concrete.
Purchase SC25 from Amazon – 1 Gallon
Purchase SC25 from Amazon – 5 Gallon
One thing to pay close attention to is the spelling of ingredients for some penetrating sealers. For example, a popular seller at home improvement centers is silicone sealers. Notice the difference? Silicone versus siliconate. It’s easy to miss this.
We do not recommend a silicone sealer for traffic areas such as a garage floor or outside on walkways, driveways, and patios. The reason is that they tend to sit more on top of the surface and do not penetrate as well.
Though they have good hydrophobic and oleophobic properties, they wear down at the surface extremely quickly and lose their sealing properties. Yearly reapplication is recommended. They also are not U.V. resistant and will deteriorate over time when exposed to sunlight.
Will a siliconate sealer stop oil stains in concrete?
This is one point that we want to make clear. Though siliconate concrete sealers can be somewhat resistant to oil stains, they are not stain-proof. In fact, there is not a penetrating sealer available that is. Only a commercial quality garage floor coating will provide close to stain-proof oil protection.
The reason for this is that penetrating sealers are non-film forming. Unlike coatings, they seal the concrete at the subsurface. However, what makes siliconate sealers unique is that they consist of a relatively larger molecular structure than many other types of penetrating sealers. This allows for better surface protection and better resistance to stains.
The best protection from oil stains when using a penetrating sealer is to clean them up as soon as you see them. Don’t let them dwell or sit for a long time. If they do sit, they will eventually seep into the very upper layer of the concrete surface and can leave a faint stain once cleaned.
If resisting oil stains are one of your primary concerns when choosing a penetrating sealer, then we suggest you read our review of PS100 Oil & Salt Repelling Sealer by Concrete Sealers USA.
In addition, GhostShield has a combination system for oil repellency that uses penetrating sealers as well. You can read our review of GhostShield 8510 and learn how this system works.
Applying a penetrating sealer to your garage floor
Make sure the surface of the garage floor is free of dust and oil. Clean up any oil spills that may have accumulated and scrub the surface of your garage floor with TSP and a stiff-bristled brush. A floor maintainer with a black pad works even better.
Rinse off the surface with a hose and let it thoroughly dry – usually, 24 hours is sufficient unless the humidity is up. When ready, apply the sealer with a low-pressure pump sprayer or roller and paintbrush. Do not let it puddle till dry or it will leave a white chalky substance that is hard to remove. The area should be ready for traffic in 12 hours. That’s it!
Once done, you will have a natural-looking surface that is protected for the next 10 years or more depending on traffic. So if you are the no-frills, “working” garage type of person that wants to protect their garage floor with minimal preparation and expense, then a siliconate penetrating garage floor sealer is definitely worthy of your consideration.
Adam says
can an acrylic sealer be applied on top of penetrating sealer? I’m interested in the best of all worlds for my garage floor treatment, and wonder if this could work and how would I make a successful application of this combo?
Shea says
Hi Adam. In most cases, an acrylic sealer can be applied to concrete that has been treated with a siliconate sealer. Always check with the vendor or manufacturer first though before application. However, this is not true of resinous coating such as epoxy. The sealer would need to be removed via grinding first. As an FYI, many acrylic sealers do not perform well for a garage floor. Use a solvent-based acrylic at the minimum, not a water-based. The best type of acrylic to use is an MMA acrylic sealer. This is an example here.
Bert says
I have a new basement that was dug out and the concrete floor is producing a lot of dust that is being tracked through the house. Is one of these products a good choice to take care of the dusting issue? The space is used for storage, no vehicles parked on it, shovels dragged over, etc. Thanks
Shea says
Hi Bert. No, PS101 or any other siliconate sealer on it’s own is not enough to stop a lot of dusting. We have an article here that discusses dusting and what type of products can be used.
Cathy Mallick says
Do you need to etch the floor to prep before applying a penetrating sealer?
Shea says
Hi Cathy. No, etching is not usually required unless the concrete is extremely smooth. To test, place a few drops of water on the concrete in various areas. If the concrete turns darker and absorbs the water within a few minutes, then you can use a penetrating sealer.
Chris Goudreau says
I have densified my shop slab with Dayton Pentra-Hard, a lithium-based densifier. The slab has a steel trowel finish. What are my options for a sealer? I want to prevent staining and allow ease of cleaning for general automotive use/repair.
I don’t love the idea of a topical sealer that will wear off quickly.
Shea says
Hi Chris. Though there are commercial quality topical coatings designed to last years, however, the densifier treatment precludes the use of them unless you were to grind the concrete. This leaves you with using a penetrating sealer, providing that the current surface will still absorb enough water in order to accept them. Penetrating sealers can help to resist stains, but they are not stain proof since they are non film forming. We can recommend a couple of sealers. The first would be PS100 by Concrete Sealers USA. It’s an oil resistant sealer that works very well. The other would be GhostShield 8510. It’s an oil resistant sealer as well. You will need to do some water drop tests in various areas first to make sure that the concrete will accept them. If the surface immediately turns a darker color and will absorb a few drops of water within a minute or so, then you will be OK. However, if the water tends to sit there for a long period first, then you may need to sand the surface (not grind) first to knock down the hydrophobic effect of the newly applied densifier.
Chris Goudreau says
Thanks! I really appreciate the reply. That is also what my research led me to, so good to have you confirm it.
Dylan says
Can I use a stain (before or after) with a siliconate penetrating sealer? I have a cabin with a slab we poured a few months ago. I don’t care a whole lot about the look so much as the expense, ease, and maintenance. But right now it looks pretty white and I’m wanting a slightly darker color.
Shea says
Hi Dylan. Stains can only be applied to bare, untreated concrete. If any type of sealer is applied first, the stain will not take. To answer your questions, yes, a sealer such as this can be applied after the stain. However, most stains have a clear coating applied over them in order to protect the surface and to make the color pop. Penetrating sealers such as PS101 will not do that. The concrete will retain the same matte / dull color. Something else to consider is that true stains will not provide a solid looking color. They will be mottled and varying in color as they react with the concrete surface and density. This article about Delta Dye will give you a better idea.
PDX Joy says
We just finished building a garage with a concrete floor that was poured 4 months ago. I have a few questions. 1) The concrete guys spilled a plate sized section of concrete that’s at least 1/8″ deep that will need ground down to match the rest of the floor. (I’m not calling them to fix it because I don’t want to see them ever again.) What kind of tool/angle grinder/drill bit attachment do you recommend to grind this down and also get it to a smooth surface in order to seal it? 2) As it’s brand new, do I need to do a thorough TSP cleaning of the floor? The only thing on the floor is a some drywall dust and mud from boots. 3) I think we are going to apply a penetrating sealer with either a sprayer or mop. Should I also seal the 4″ knee wall? Which sealer do you recommend for a brand new floor?
Shea says
Hi Joy. I’m assuming that the plate sized concrete that was spilled on the surface was done after it was troweled or it wouldn’t be there. If that is the case, we recommend taking a hammer and large chisel to it first. Hold the chisel at an angle that is almost parallel to the floor, but not quite. Many times concrete that is spilled onto a troweled surface will not adhere very well and can actually be knocked off this way. If that doesn’t work, then you will need to grind. We recommend using a 4″ or 7″ angle grinder with appropriate sized concrete turbo cup grinding wheel. This will make quick work of it. Just make sure to were a respirator as the concrete dust will be impressive.
Before applying a sealer, clean the surface with a mild scrubbing using a deck brush and a soapy solution or concrete degreaser. Rinse well. You don’t need something as aggressive as TSP. Once it has thoroughly dried, you can apply a sealer. We would recommend using PS101 siliconate sealer or PS104 densifier with siliconate sealer added. Either one with do a great job. If you are in snow country and the floor will see some deicing fluids or road salts, then use the PS104. It won’t hurt to do the stem walls if you have additional sealer remaining.
Steve Welch says
First, thanks so much for such an informative site!
Here’s my question: our home was built 20 years ago, and the garage concrete was floated too smooth – it is dangerous when wet. I am considering etching the concrete with Tek Gel or phosphoric acid to roughen the surface for improved safety, and then applying siliconate sealer to help with stain resistance. I did consider grinding, but my local rental stores don’t have the Diamabrush – and anyway, the above etchers seem like they might be less messy to work with.
Am I on the right track? Any thoughts on Tek vs phos. acid? Thanks!
Shea says
Hi Steve. Yes, etching would be better than grinding. Grinding is going to leave swirl marks which will completely change the look of the surface. We recommend using PS102 by Concrete Sealers USA once you etch.
Mgt says
Hello, I removed my basement carpet after water leaks and now have bare concrete floor. I do not want to put anything (such as carpet or vinyl or tiles or interlocking rubber mats or wood) that would hide the water leak with or without mold growth.
Looking for an economical option to make it safer and smoother concrete floor. So far my research tells me epoxy paint or concrete paint or siliconaTe.
After reading the above, it seems siliconaTe is the best option due to durability, quick and easy application with out labor cost.
Am I on the right track?
Shea says
Hi MGT. A siliconate sealer is a penetrating sealer. And like all penetrating sealers, it will not change the look of the concrete, nor will it make it smoother if that is your goal. Also, if there is any mastic or carpet glue on the concrete it will need to be removed first.
Julien Larocque says
Hi!
I have a fresh garage concrete slab with a smooth mechanicaly troweled surface. Based on recommendation from my supplier I was going for a 40% Silane penetrating sealer followed by a Acrylic topical sealer for a clean smooth look. Unfortunatly I found the acrylic sealer way too weak against scratch wich will ruin in a short time the clean look I am gooing for. I did not apply the product.
I have the Silane sealer done and I am thinking that could be enought? By reading your website I am thinking a densifier and/or oil repelant (PS100) should have been more appropriate for my needs. Can I apply theses product over the Silane sealer with success?
My main concern are the concrete floor to be dust free, scratch free, resistant to salt water and not having oil spill to stain when quickly removed.
Shea says
Hi Julien. Yes, acrylic is the least durable of coatings. The main issue for any coating is that a sealer such as silane should never be applied beforehand, particularly to smooth troweled concrete. It effectively blocks penetration of coatings and needs to be removed via grinding or other mechanical means first. PS100 would be a good choice based on your requirements, however, you will need to contact Concrete Sealers USA first to discuss. We cannot tell you for sure or not if it can be applied over the silane. PS100 needs to penetrate the concrete surface and the silane may not allow for that.
Brian Hearn says
Good day my driveway and garage floor where sealed 10years ago the product which I don’t remember worked very well however I can see where it looks like it should be redone. The driveway is has a brushed finish the garage is smooth want to reseal both what prep is required and what product do you recommend. Not into how it looks after all its just a garage floor lol.
Thanks
Shea says
Hello Brian. We are assuming that they were sealed previously with a penetrating sealer and not a coating. A siliconate sealer would be a good choice. For the driveway, we would recommend PS102 by Concrete Sealers USA. It is designed to work best with concrete that has a broom or rougher type of finish. For the garage, use PS101. It works best for smoother finishes. The only prep required is to clean the surfaces well and then let them completely dry before applying the sealers.
RJD says
Hi! I’m having a new house built with a poured concrete floor. I’ve read enough to know that I want to harden/densify the concrete, then apply a paint or epoxy to give it color.
Related to the question I just sent, is there a difference between silicate-based sealers and siliconate sealers, or are they the same thing?
What do you recommend?
Shea says
Hi RJD. Silicates are used to densify and harden (densifiers) while siliconates are used as water repellents. Densifiers are typically utilized for bare concrete in warehouses and industrial settings where a coating will not be applied. They are also used in the process of polishing concrete. In addition, they can aid with slowing down moisture intrusion from below the surface. It’s not as common to apply them to good concrete where a coating is applied unless there are possible moisture issues. They can sometimes have an effect on how well a coating adheres. There are also densifiers that a siliconate sealer added. These make for good bare concrete sealers when oils are not a primary concern. We discuss them here.
If you plan on applying paint (not very durable) or a coating (much more durable), then applying a densifier or sealer beforehand is not recommended. All sealers have to be removed first before applying a coating to concrete.