Comments on: Eric’s ArmorPoxy SPGX Garage Floor Coating Installation

By: Shea

Shea — Wed, 15 Mar 2023 06:18:30 +0000

In reply to Sal. Hi Sal. Grinding is not necessary, however, you do need to etch the concrete surface at a minimum. Yes, the clear coat is Clear SPGX that has not been tinted.

By: Sal

Sal — Wed, 15 Mar 2023 02:34:27 +0000

Hello
Do I need to “Diamond grind” the surface before applying SPGX? My surface is fairly clean.

Also can you clarify your reference to clear coat? Is clear coat SPGX without the grey color pigment? Or a different product?

By: Shea

Shea — Tue, 06 Sep 2022 17:12:10 +0000

In reply to Deena Brasser. Hello Deena. Is your floor painted or coated with epoxy? It makes a difference if it can be top coated with a clear or not. This article here explains the differences if you are not sure.

By: Deena Brasser

Deena Brasser — Tue, 06 Sep 2022 14:52:49 +0000

Just wondering if the SPGX polyurea coating can be used solely as a top coat over previously painted and flecked garage floor. The floor has had hot tire pickup and needs to be sealed.

By: Shea

Shea — Mon, 01 Mar 2021 18:34:17 +0000

In reply to Ferd. Hello Ferd. Epoxy is not intended for outdoors. It's not U.V. stable and will amber (yellow tint) when exposed to direct sunlight. If in the sun long enough, it can begin to chalk up and deteriorate. Polyurea and polyaspartic coatings are U.V. stable and typically used outdoors. Also, keep in mind that coatings can get very slick when wet if used outdoors. It's imperative that you use an anti-slip media in the final coat.

By: Ferd

Ferd — Mon, 01 Mar 2021 16:29:36 +0000

Has any one used epoxy coating on outdoor concrete decking? Any product recommendations and lessons learned would be very much appreciated.