To our Reader’s: This post may contain affiliate links. If you use these links to make a purchase, we may earn a small commission – Thanks! As an Amazon Associate, All Garage Floors earns from qualifying purchases. You can read our full disclaimer here.
A garage floor sealer sounds simple enough when you want to seal the concrete in your garage, but did you know that they come in two categories? Topical sealers, such as epoxy coatings, polyurethanes, polyaspartics, and acrylics, are an example. Penetrating sealers is another. So which do you choose? What are you trying to accomplish? Which is best for your application? Getting bewildered yet? Don’t worry, it’s not as confusing as it might seem at first.
Sealing the concrete in the garage is one of many garage flooring options available today. Many times you are working on the premise of protecting the bare gray concrete for a nice clean look at the most economical cost.
However, the many colored epoxy and paint coatings available on the market today are technically sealers as well. We will look at the different type of garage floor sealers available, discuss their properties, and learn how they will work on your garage floor.
Topical Garage Floor Sealers
Topical sealers adhere to the surface of concrete. Known as film forming sealers or floor coatings, they form a protective layer that adheres to the surface. Film forming sealers can be colored in order to change the looks of the concrete or they can be clear. Clear sealers will enhance the look of bare concrete as well as bring out the color of stained concrete.
Acrylic concrete sealers
Most acrylic sealers are clear and form a thin protective layer on bare concrete that is fairly easy to apply. You can use either a pump-up sprayer for the application or apply it with a paint brush and paint rollers out of a tray. Typically, two thin coats are applied for the best protection.
Acrylics sealers will protect the floor from water and chloride intrusion and give moderate protection against oil stains, vehicle fluids, hot tire pick up, and road salt if cleaned up fairly quickly.
They can also enhance the look of the floor in your garage by giving it a somewhat wet, glossy look or you can opt for a less flashy matte finish. Once applied, it will dry to the touch in a few hours. It can be driven on the next day and sometimes sooner depending on weather conditions at the time of application.
Look for an acrylic sealer with UV protection if you have parts of your garage floor that is exposed to sunlight. If you don’t opt for the UV protection, the sun can cause the sealer to yellow over time.
Learn more here: The Easy Finish of Acrylic Floor Sealers
Though they are the least durable of the topical sealers, they stand up well to light or moderate traffic and may need to be reapplied once every 18 to 24 months.
For a more durable alternative, we recommend the performance of MMA acrylic sealers. These have longer endurance properties than standard acrylics sealers and can withstand harsher chemicals.
Garage floor coatings
Next in the lineup of topical sealers are garage floor coatings. These are typically 2-part resinous coatings that are mixed together before being applied to the concrete in multiple coats. They chemically cure and create a hard coating that is extremely durable. The thickness and abrasive properties, including chemical resistance of these coatings, can vary depending on which type of product is used.
Epoxy concrete sealers
The most popular of these coatings would be garage floor epoxy. Epoxy creates a dense cross linking adhesion in the coating due to the chemical bonding it provides. This makes epoxy sealers a much thicker coating than acrylic and very durable. They are more difficult to apply however. They require thorough concrete preparation, they are time sensitive during application, and they must go on using paint brushes and rollers.
Epoxy sealers can withstand heavy traffic and are abrasion resistant. They are also resistant to water, most chemicals, oil, vehicle fluids, road salts, and hot tire pick up. It’s generally not a problem if you are slow to clean up any oil or fluids from your car that usually stain concrete. They generally wipe right up. When it comes time to clean an epoxy floor, mild soap and water is usually all it takes.
Epoxies are available in a clear coat as well as pigmented finishes and have a glossy shine that will enhance color in the concrete. They are susceptible to UV rays however and can yellow if exposed to sunlight. A good quality epoxy coating can last for years on your garage floor.
Learn more here: Why Epoxy is the Premier Garage Floor Coating
Many of the garage floor coating systems today are made with a combination of layers of pigmented and clear coat epoxy to give a garage floor a very durable, chip resistant finish that will last many years. If that’s not in the budget, then a simple clear or pigmented coat on your floor will still give you greater protection for a longer period of time compared to acrylic sealers.
Polyurethane concrete sealers
Next on the list of topical sealers is polyurethane. Polyurethane has many of the same properties as epoxy and is even more durable. It also has the added benefit of being resistant to UV rays. So if you have a garage floor that is exposed to sunlight, you don’t have to worry about it turning yellow.
It used to be that polyurethane was only used as a clear coat sealer, but that is slowly changing however with manufactures starting to offer it in colors. One thing to keep in mind is that polyurethane does not bond well to bare concrete and usually needs a primer such as epoxy applied first. You also have a choice of finish from matte, to semi-gloss, to glossy.
Learn more here: Epoxy vs Polyurethane Garage Floor Coatings
Like epoxy, most polyurethanes can be slippery when wet. Because they have a thinner film thickness than epoxy, polyurethane makes for a great top coat to apply with an anti-slip agent. Application difficulty and dry time is similar to epoxy as well. Though a little more expensive, polyurethane may be what you need if you have a garage floor that is exposed to sunlight and you want something other than a glossy finish.
Polyurea and polyaspartic floor sealers
Last on the list is the newer polyurea and polyaspartic floor sealers. These are a sub group of polyurethane and have a similar finish to epoxy and polyurethane coated floors. Unlike epoxy and polyurethane, these coatings can be applied in extreme temperatures from below freezing to over 100 degrees.
What makes these coatings popular is their extremely fast return to service times. They can be installed on your garage floor in one day and driven on the next. Most polyurea and polyaspartic coatings need to be applied by a professional due to their very fast set up times.
There are newer polyurea coatings however coming to market that are much more DIY friendly. These allow for longer application windows which help reduce the anxiety of using this type of floor coating when installing it yourself.
Penetrating Garage Floor Sealers
Penetrating sealers is the next category in concrete sealers for a garage floor. There are four different types of penetrating sealers for concrete, but only two need be discussed for a garage floor.
The first of these is a siliconate sealer. Though this kind of sealer is used extensively for exterior concrete such as sidewalks and driveways, it will work just as well in your garage if you just want to seal the floor without changing the way it looks.
It works by penetrating into the upper surface of the concrete and reacting with the free lime. This will form a calcium silicate that essentially helps to strengthen the surface of the concrete by filling the pores and preventing liquids from migrating through.
Learn more here: Why Penetrating Siliconate Sealers May Be All You Need
This process works to help prevent freeze-thaw damage and deterioration due to corrosion. It has a matte finish that doesn’t change the appearance of the surface because it penetrates into the concrete. It’s easy to apply using a pump sprayer or rollers and generally only needs one coat. Some of these sealers are expected to last 20 years or more.
The second choice that is being used among the bare concrete purists are concrete densifiers. Many are available as a densifier and sealer combination.
Used primarily for polishing concrete and adding strength to newly poured concrete, these sealers are being used more on garage floors by people looking for a no nonsense simple solution that will prevent dusting, harden the surface of a working garage or shop floor, and help to repel liquids as well.
One thing to keep in mind; if you have small issues with moisture coming through the concrete, a penetrating garage floor sealer is a good choice to consider. Because they work by filling the concrete pores, they do well for blocking moisture coming up from underneath your slab.
If you like the finish of acrylic sealers, make sure the solids content is not more than 25% and that it is not applied in more than two coats. This should be permeable enough to let the moisture transmit through the sealer.
Resinous coatings such as epoxy, polyurethanes, and polyurea will not allow for moisture transfer and can peel or pull the concrete up with it if you have moisture problems. Before applying any coating or sealer, you should always conduct a moisture test. Particularly if your floor shows any signs of moisture or you suspect that you may have moisture issues.
Depending on what you want your garage floor sealer to do for you, decide which product is best suited for your requirements and budget. Either way you choose, a good sealer will be a nice investment in the care and finish of your floor.